Pretension rear axle housing with spreader (brace)
Test values for rear axle housing expansion
Number
Designation
Model 124.003/004/007/019/ 022/023/026/027/030/040/ 042/043/050/060/062/079/ 082/083/090, Model 124.104/107 as of 01.05.94 Model 124.127/128/129/130/ 131/133, model 124.186 as of 01.03.94, except (code 450) Model 124.188/190/191/193/ 226/230/290/330/333/393
Model 124.020/021/080/ 081/120/125/126/180/ 185/186, with (code 450) as of 01.11.88
BE35.31-P-1002-04C
Rear axle housing expansion (spread dimension) when installing circlip
mm
0.3
0.3
Test values for rear axle housing expansion
Number
Designation
Model 129.060
Model 170.444/ 445/447/ 449
Model 201.018/023/024/ 122/126, with (code 450) as of 01.11.88
BE35.31-P-1002-04C
Rear axle housing expansion (spread dimension) when installing circlip
mm
0.3
0.3
0.3
Test values for rear axle housing expansion
Number
Designation
Model 201.028/ 029/035/036/ 128
Model 202.018/078/ 120/121/122/ 125/182 with (code 450), model 202.018/020/ 022/120/121/125 with (code 211) ASD
Model 202.020/022/023/ 024/025/026/028/029/ 080/081/082/083/086/ 087/088/089/ 128/188, model 202.085 with automatic 5-speed transmission,
Model 202.134/194 except code 450
BE35.31-P-1002-04C
Rear axle housing expansion (spread dimension) when installing circlip
mm
0.3
0.3
0.3
Test values for rear axle housing expansion
Number
Designation
Model 208.335/344/ 345/347/348/ 435/444/445/ 447/448
BE35.31-P-1002-04C
Rear axle housing expansion (spread dimension) when installing circlip
mm
0.3
Test values for rear axle housing expansion
Number
Designation
Model 210.003/004 with code 450
Model 210.007 except code 450
Model 210.010/020/ 035/037/048/ 061/062/210/ 235/237/248/ 261/262/610
BE35.31-P-1002-04C
Rear axle housing expansion (spread dimension) when installing circlip
mm
0.3
0.3
126 589 00 31 00
126 589 08 21 00
Contact arm
Spreader
P35.31-0401-01
1 Attach spreader (058) to rear axle housing; to do this, tighten hexagon collar bolts (arrows) (guidance value: approx. 40 Nm).
P35.31-0424-01
2 Turn straight edge of thrust piece to face front rib (arrow).
3 Screw in threaded spindle (058a) of spreader unit by hand until thrust piece touches tapered roller bearing outer race.
P35.31-0402-01
4 Place contact arm (059) for measuring spread dimension on spreader.
Set dial gauge to "0" with 3 mm preload. Ensure that dial indicator remains set to "0".
Stop bolt (arrow) of the contact arm (059) must abut with contact surface of rear axle housing.
P35.31-0404-01
5 Screw in the threaded spindle (058a) of the spreader until the rear axle housing has reached the specified spread dimension.
Do not exceed the spread dimension when spreading. Otherwise the rear axle housing may become damaged.
