ar3531p055016t

Installing tapered roller bearing inner race on drive pinion and pressing in together with radial sealing ring

Typ ar · téma 35.31 · verze 0103 · 2009-02-11

Platí pro: Rear axle center assembly dia. 198 in MODEL 211.004 with CODE (450) Taxi version Rear axle center assembly dia. 198 in MODEL 171.456, 211.006, 211.054 /056 up to 31.5.06, 211.065 /082 /087 /092 /206, 211.254 /256 up to 31.5.06, 211.265 /282 /287 /292 /606, 219.356 up to 31.5.06, 230.467

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.31 Rozvodovka — Řada 171 (modely 456) · Řada 211 (modely 004, 006, 054, 056, 065, 082, 087, 092, 206, 254, 256, 265, 282, 287, 292, 606) · Řada 219 (modely 356) · Řada 230 (modely 467)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava — Řada 171 (modely 456) · Řada 211 (modely 004, 006, 054, 056, 065, 082, 087, 092, 206, 254, 256, 265, 282, 287, 292, 606) · Řada 219 (modely 356) · Řada 230 (modely 467)

AR35.31-P-0550-16T

Installing tapered roller bearing inner race on drive pinion and pressing in together with radial sealing ring

Universal hypoid-gear lubricants

BB00.40-P-0235-07A

Installing tapered roller bearing inner race on drive pinion and pressing in together with radial sealing ring
Installing tapered roller bearing inner race on drive pinion and pressing in together with radial sealing ring

140 589 13 15 00

Drift

Puller

000 589 65 33 00

Installing tapered roller bearing inner race on drive pinion and pressing in together with radial sealing ring

P35.31-0275-01

1 Check thrust washer (arrow) of tapered roller bearing inner race for exact seating.

Installing tapered roller bearing inner race on drive pinion and pressing in together with radial sealing ring

P35.31-0274-01

2 Insert tapered roller bearing inner race (43d) into rear axle housing.

3 Coat the lip of the new radial sealing ring (42) with Universal hypoid gear oil and mount on drift (034).

4 Press in tapered roller bearing inner race (43d) and radial sealing ring (42) into rear axle housing using puller (035).

5 Remove puller (035) with drift (034) from rear axle housing.

Odkazované dokumenty