ar3531p055001t

Removing left locking ring from rear axle housing using spreader

Typ ar · téma 35.31 · verze 0106 · 2009-02-16

Platí pro: Rear axle center assembly dia. 198 in MODEL 211.004 with CODE (450) Taxi version Rear axle center assembly dia. 198 in MODEL 171.456, 211.006, 211.054 /056 up to 31.5.06, 211.065 /082 /087 /092 /206, 211.254 /256 up to 31.5.06, 211.265 /282 /287 /292 /606, 219.356 up to 31.5.06, 230.467

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.31 Rozvodovka — Řada 171 (modely 456) · Řada 211 (modely 004, 006, 054, 056, 065, 082, 087, 092, 206, 254, 256, 265, 282, 287, 292, 606) · Řada 219 (modely 356) · Řada 230 (modely 467)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava — Řada 171 (modely 456) · Řada 211 (modely 004, 006, 054, 056, 065, 082, 087, 092, 206, 254, 256, 265, 282, 287, 292, 606) · Řada 219 (modely 356) · Řada 230 (modely 467)

AR35.31-P-0550-01T

Removing left locking ring from rear axle housing using spreader

Test values for friction torque of rear axle differential

Number

Designation

Model
171.456

Model
211.006/054/
056/065/082/
087/092/206/
254/256/265/
282/287/292/
606,

Model 211.004 with code 450

BE35.31-P-1001-04F

Rear axle housing expansion (spread dimension) for circlip removal

mm

0.10...0.13

0.10...0.13

Test values for friction torque of rear axle differential

Number

Designation

Model
219.356

Model
230.467

BE35.31-P-1001-04F

Rear axle housing expansion (spread dimension) for circlip removal

mm

0.10...0.13

0.10...0.13

Removing left locking ring from rear axle housing using spreader
Removing left locking ring from rear axle housing using spreader

140 589 05 31 00

126 589 08 21 00

Contact arm

Spreader

Removing left locking ring from rear axle housing using spreader

P35.31-0243-01

1 Attach spreader (058) to the rear axle housing; to do this, tighten collar bolts (arrows) (guidance value: approx. 50 Nm).

Removing left locking ring from rear axle housing using spreader

P35.31-0244-01

2 Position measuring yoke (059) for expansion dimension measurement on spreader (058) and press against the two bolts from below.

Set dial gauge to "0" with 3 mm preload.

The stop pin (arrow) on the contact arm must touch the contact surface on the rear axle housing.

Removing left locking ring from rear axle housing using spreader

P35.31-0245-01

3 Turn the even surface (arrow) of the thrust piece to the opening of the locking ring (29).

4 Screw in the threaded spindle (058a) of the spreader (058) by hand until the thrust piece abuts the tapered roller bearing outer race.

Removing left locking ring from rear axle housing using spreader

P35.31-0246-01

5 Screw in the threaded spindle (058a) of the spreader (058) until the rear axle housing has reached a spread dimension of 0.10 to 0.13 mm.

Do not exceed the spread dimension when spreading. Otherwise the rear axle housing may become damaged.

6 Remove contact arm (059).

Removing left locking ring from rear axle housing using spreader

P35.31-0247-01

7 Remove left circlip (29) from rear axle housing using pliers (064)

8 Mark the left circlip (29).

9 Unclamp the rear axle housing and detach spreader (058).