Installing drive pinion with bearing in rear axle housing

Typ ar · téma 35.30 · verze 0104 · 2001-07-24

Platí pro: REAR AXLE 741.130 /131 /40 /43 /52 /530 /540 /55 REAR AXLE 741.130 /408 /409 in MODEL 690.6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.30 Pohon, hnací hřídele — Řada 690 (modely 6**)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava — Řada 690 (modely 6**)

Platí také pro motory/převodovky: 741 130, 741 131, 741 40*, 741 408, 741 409, 741 43*, 741 52*, 741 530, 741 540, 741 55*

AR35.30-D-4815-09A

Installing drive pinion with bearing in rear axle housing

Rear axle 741.130/131/40/43/52/530/540/55

601 589 02 63 00

000 589 10 15 00

312 589 05 15 00

318 589 01 15 00

Support bridge

Drift

624 589 00 15 00

D35.30-0056-01

D35.30-0055-01

1 Install shim of calculated thickness in axle housing.

 The chamfered side must face towards the coupling flange.

2 Drive in tapered roller bearing outer race of pinion-side bearing (1, )

D35.30-0058-01

D35.30-0057-01

3 Drive in tapered roller bearing outer race of flange-side bearing
(2, ).

4 Insert drive pinion.

5 Screw device (3, ) onto axle housing and position spindle of  on drive pinion.

D35.30-0060-01

D35.30-0059-01

6 Fit new compression ring (6) on drive pinion.

7 Drive in outer tapered roller bearing (7, ).