Determining installed dimension of differential assembly

Typ ar · téma 35.30 · verze 0202 · 2020-02-04

Platí pro: Rear axle 742.825, 746.888 in model 368.0/1, 384.3 Rear axle 746.270/271 in model 382.1, 634.0 Rear axle 746.881/882 Rear axle 746.984 in model 384.0 Rear axle 746.987/988/996/998 in model 958.0/1 Rear axle 746.999 in model 384.067 #D

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.30 Pohon, hnací hřídele — Řada 368 (modely 0**, 1**) · Řada 382 (modely 1**) · Řada 384 (modely 0**, 067, 3**) · Řada 634 (modely 0**) · Řada 958 (modely 0**, 1**)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava — Řada 368 (modely 0**, 1**) · Řada 382 (modely 1**) · Řada 384 (modely 0**, 067, 3**) · Řada 634 (modely 0**) · Řada 958 (modely 0**, 1**)

Platí také pro motory/převodovky: 742 825, 746 270, 746 271, 746 881, 746 882, 746 888, 746 984, 746 987, 746 988, 746 996, 746 998, 746 999

AR35.30-B-0475-01XB

Determining installed dimension of differential assembly

Rear axle	742.825, 746.888 in model 368.0/1, 384.3
Rear axle	746.270/271 in model 382.1, 634.0
Rear axle	746.881/882
Rear axle	746.984 in model 384.0
Rear axle	746.987/988/996/998 in model 958.0/1
Rear axle	746.999 in model 384.067 #D

001 589 53 21 00

Dial gage

055 589 01 23 00

Template

055 589 10 21 00

Adjusting device

1	Install the (  ) jig (1) on the (  ) adjusting device (2).

 Observe the correct seating of the supports of the  jig (1) on the surface of the  adjusting device (2), as well as the seating of the supports (4) on the ledge of the  jig (1).

2	Install the  dial gauges (3) on the  adjusting device (2), and support their contact points on the ledge of the  jig (1)

 Set a load of approximately 2 mm on pointer (5) and adjust on zero the pointers (6) of the  dial gauges (3).

B35.31-0033-11