ar3520p010702gh

Replace rubber mount of upper wishbone

Typ ar · téma 35.20 · verze 0103 · 2003-02-17

Platí pro: MODEL 163.113 /128 /136 /154 /157 /172 /174 /175

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.20 Vedení kola, náboj — Řada 163 (modely 113, 128, 136, 154, 157, 172, 174, 175)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.40 Příčné rameno/rameno/stabilizátor — Řada 163 (modely 113, 128, 136, 154, 157, 172, 174, 175)

AR35.20-P-0107-02GH

Replace rubber mount of upper wishbone

Replace rubber mount of upper wishbone

Extraction and insertion tool

163 589 00 43 00

Replace rubber mount of upper wishbone

P35.20-0285-02

Remove rubber mounts

1 Align sleeve (094b), part 02, centrally and insert smaller diameter of drift (094d), part 04, into rubber mount (91e).

2 Press rubber mount (91e) out of upper wishbone.

Replace rubber mount of upper wishbone

P35.20-0286-01

Install rubber mount

Install rubber mount (91e) with the larger collar diameter on the outside (arrows).

Replace rubber mount of upper wishbone

P35.20-0287-01

3 Moisten outside diameter of rubber mount (91e) with lubricant.

4 Insert smaller diameter of drift (094d), part 04, into rubber mount.

5 Press rubber mount (91e) half way in initially.

Replace rubber mount of upper wishbone

P35.20-0288-01

6 Align sleeve (094b), part 02, centrally and insert smaller diameter of drift (094d), part 04, into rubber mount.

7 Press rubber mount (91e) centrally into upper wishbone.

8 Check installed position. The collar of the rubber mount must touch the upper wishbone on both sides (arrows).