210 589 01 43 00
Removal and installation tool
Repair materials
Number | Designation | Order number |
BR00.45-Z-1002-06A | Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00 | A 000 989 01 60 |
P35.10-2073-01
Removing rubber mounts
1 Bend up all four tabs at rubber mount (arrows) using a suitable tool.
P35.10-0225-01
2 Attach puller tool (01c, 01d, 01e) for rubber mount (1a) to rear axle carrier.
1a Rubber mounts
01c Hexagon bolt
01d Thrust piece, part 02
01e Puller, part 01
P35.10-2069-01
If glycol oil is still in rubber mount, cover rubber mount with a suitable cloth or rag (arrow) (wear safety glasses).
3 Press inner core of rubber mount out of rear axle carrier using puller tool.
P35.10-2070-01
4 Remove puller tool and inner core of rubber mount (arrow).
Wipe away any glycol oil that has flowed out of rear axle carrier.
P35.10-2071-01
5 If possible press out rubber mount jacket (arrows) using a suitable tool
P35.10-2072-01
If the rubber mount jacket cannot be pressed out of the rear axle carrier, press in rubber mount jacket forcefully from outside and lever out at lower edge (arrow) using a suitable tool (assembly lever).
Ensure that rear axle carrier is not damaged near rubber mount seat.
P35.10-0226-01
Installing rubber mounts
6 Grease rubber mount (1a) around circumference with lubricant.
7 Install rubber mount (1a) using insertion tool (01c, 01h, 01i).
1a Rubber mounts
01c Hexagon bolt
01h Insertion tool, lower part 04
01i Thrust piece, part 03