Řady
cs
ar3330p0086a
Checking concentricity of flange
Typ ar · téma 33.30 · verze 0115 · 2012-04-17
Platí pro: MODEL 460 MODEL 461 (except 461.331) MODEL 463 (except 463.270 /271) up to model year 2013 /facelift 2012
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 2 Podvozek › 33 Přední náprava › 33.30 Pohon, mezinápravový diferenciál, hnací hřídel — Řada 460 · Řada 461 (modely 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Řada 463 (modely 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
EinPAS 17 Hnací ústrojí/náprava › 17.50 Přední náprava › 17.50.65 Převodovka přední nápravy / průchozí náprava — Řada 460 · Řada 461 (modely 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Řada 463 (modely 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
AR33.30-P-0086A
Checking concentricity of flange
3.4.12
MODEL 460
MODEL 461 (except 461.331)
MODEL 463 (except 463.270 /271) up to model year 2013 /facelift 2012
Checking
1
Disconnect propeller shaft from drive flange (1)
Tie up propeller shaft at the side of the frame.
Tool kit
*000589109900
2
Carry out concentricity measurement on the drive flange (1)
AR35.30-P-4671-02A
*BE35.30-P-1004-01A
Dial indicator holder
*363589022100
Dial indicator
*001589532100
Measuring flange
*460589012300
In the event of deviations replace the drive flange (1). Before removing the drive flange (1) the friction torque of the complete axle (without wheels) should be measured. In the process the brake must be released, see:
Remove/install drive flange
AR33.30-P-0472GG
3
Fit propeller shaft to drive flange (1)
Replace self-locking nuts.
*BA41.10-P-1002-01B
Tool kit
*000589109900
Number
Designation
Model 460, 461, 463
BE35.30-P-1004-01A
Total concentricity deviation of flange
mm
0,07
Number
Designation
Model 460
Model 461
Model 463
BA41.10-P-1002-01B
Bolt, propeller shaft to transmission flange
Nm
35
35
35
Odkazované dokumenty
