ar3325b030002ta

Removing and installing drive shaft bearing on steering knuckle

Typ ar · téma 33.25 · verze 0101 · 2016-02-12

Platí pro:

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 33 Přední náprava › 33.25 Těleso nápravy, těhlice — Řada 958 (modely 0**)

EinPAS 17 Hnací ústrojí/náprava › 17.50 Přední náprava › 17.50.51 Poloosa/hnací hřídel — Řada 958 (modely 0**)

Platí také pro motory/převodovky: 733 050

AR33.25-B-0300-02TA

Removing and installing drive shaft bearing on steering knuckle

Removing and installing drive shaft bearing on steering knuckle
Removing and installing drive shaft bearing on steering knuckle
Removing and installing drive shaft bearing on steering knuckle

387 589 02 15 00

Drift

000 589 30 33 00

Inside puller

000 589 35 33 00

Counter-support

Produtos para reparos

Número

Denominação

Número de pedido

BR00.45-B-1028-06A

Long effect lubricant - DBL 6811.00

A 000 989 63 51

Removing and installing drive shaft bearing on steering knuckle

W33.25-1020-01

Remove

1 Put the internal puller (2) with the counter-support (1) in the needle roller bearing.

2 Remove the needle roller bearing from the axle sleeve pin (3).

Removing and installing drive shaft bearing on steering knuckle

W33.25-1021-01

Install

3 Put the needle roller bearing with the mandrel (4) until the pin rests on the axle sleeve.

4 Grease the needle roller bearing.