Wheel hub, cap
Number | Designation | Front axle 730.353/354 | ||
BF33.20-N-1001-01A | Multipurpose grease | Capacity per wheel hub | g | 75 |
Specifications for Operating Fluids | Sheet | |||
000 589 68 33 00
Puller
Internal puller
Counter stay
Drift
000 589 35 33 00
035 589 01 33 00
403 589 06 15 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1006-01A | Loctite 573 | A 004 989 72 20 |
N33.20-0452-01
Removal
1 Detach front wheel hub with tapered roller bearing or pull off with puller if sluggish.
N33.20-0336-01
2 Pull out inner wheel bearing, radial shaft sealing ring and PU sealing ring from front wheel hub using internal extractor and counter stay.
N33.20-0448-01
Attaching
3 Clean all parts, check for wear and replace if necessary.
4 Thoroughly grease inner wheel bearing and insert.
Observe specified grease amount.
5 Coat outer circumference of new radial shaft sealing ring with sealant and drive in approx. 8 mm below upper edge of front wheel hub using drift.
Do not apply sealing compound to sealing rings with partially rubberized sealing surfaces.
N33.00-0239-01
6 Drive PU sealing ring into front wheel hub using drift.
7 Fit front wheel hub on steering knuckle.
8 Thoroughly grease outer wheel bearing and insert.
Observe specified grease amount.