ar3320d145203b

Attach transverse control arm to steering knuckle and front axle beam

Typ ar · téma 33.20 · verze 0103 · 2009-11-17

Platí pro: FRONT AXLE 730.606 in MODEL 905

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 33 Přední náprava › 33.20 Vedení kola, náboj — Řada 905

EinPAS 17 Hnací ústrojí/náprava › 17.50 Přední náprava › 17.50.41 Příčné rameno/rameno/stabilizátor — Řada 905

Platí také pro motory/převodovky: 730 606

AR33.20-D-1452-03B

Attach transverse control arm to steering knuckle and front axle beam

Wheel location, hub

Number

Designation

Front axles
730.408/409/410/
411/413/414/
415/606

BA33.20-N-1003-01A

Bolt, stop plate to transverse control arm

M10

Nm

60

BA33.20-N-1005-01A

Nut, wishbone to steering knuckle

M201.5

Nm

280

Anti-roll bar

Number

Designation

Model 905

BA32.35-N-1002-02E

Nut, stabilizer linkage to stabilizer/stop

M10

Nm

62

Attach transverse control arm to steering knuckle and front axle beam

D33.20-0002-01

1 Coat rubber springs of wishbone (12) with oil.

2 Support wishbone (12) with jack.

3 Insert front wishbone arm into bearing bracket and fix with wishbone bolt (2).

Replace the nut (3) on the wishbone screw joint, but do not tighten.

4 Lower jack under wishbone.

Attach transverse control arm to steering knuckle and front axle beam

D33.20-0004-01

5 Insert the rear wishbone arm into the bearing bracket and fix with wishbone bolt (2).

Replace nut on wishbone screw joint, but do not tighten.

Attach transverse control arm to steering knuckle and front axle beam
Attach transverse control arm to steering knuckle and front axle beam

D33.20-0021-01

D33.20-1108-01

6 Bolt the stop plate (6) onto the wishbone (12) .
Install new bolts.

7 Screw link rod (15) on to stabilizer bar (16) .

8 Screw steering knuckle (10) on to wishbone (12) .

Replace nuts (13, 17).