Front anti-roll bar removal and installation procedure |
1 | Link rod bottom mounting bolt |
2 | Bearing cap |
3 | Link rod cotter pin |
4 | Link rod |
Y32.25-0001-06
5 | Link rod mounting bracket |
Y32.25-0002-01
| Remove/install | ||
1 | Remove link rod bottom mounting bolt (1) on both side from front anti roll bar. | Slightly swing the link rod away from front anti roll bar. | |
Both side link rod bottom mounting bolt install | |||
2 | Remove front anti roll bar by removing both side front anti roll bar bearing cap (2) from front axle. | Front anti-roll bar install | |
3 | Remove link rod cotter pin (3) from link rod. | ||
4 | Remove link rod (4) from mounting bracket. | Link rod to mounting bracket install | |
5 | Remove link rod mounting bracket (5) from chassis. | Link rod mounting bracket to chassis | |
6 | Install in the reverse order. |