ar3235t2210c

Remove/install anti-roll bar on rear axle

Typ ar · téma 32.35 · verze 0104 · 2009-11-17

Platí pro: MODEL 613.364 /365 with HOSE rear axle for O560

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 32 Odpružení › 32.35 Stabilizátor — Řada 613 (modely 364, 365)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.40 Příčné rameno/rameno/stabilizátor — Řada 613 (modely 364, 365)

AR32.35-T-2210C

Remove/install anti-roll bar on rear axle

11.11.09

MODEL 613.364 /365
with HOSE rear axle for O560

Remove/install anti-roll bar on rear axle

T32.35-0001-01

1 Stabilizer brace

2 Spring support

3 Stabilizer

4 Bearing bracket halves

Remove/install

1

Lift/jack up vehicle

AR00.60-T-1000B

2

Unscrew stabilizer brace (1) from spring support (2)

Installation:

- Remove safety cotter pin

- The specified tightening torque must be exceeded by a maximum up to the next cotter pin hole release.

Castellated nut connecting anti-roll bar rod to spring mount

*BA32.35-N-1004-03H

3

Unscrew the stabilizer brace (1) from the anti-sway bar (3) and remove

Installation:

- Remove safety cotter pin

- The specified tightening torque must be exceeded by a maximum up to the next cotter pin hole release.

Castle nut, stabilizer bar strut to stabilizer bar

*BA32.35-N-1001-03H

4

Unscrew bearing bracket (4) of anti-sway bar (3) from underbody and remove anti-sway bar (3)

Installation:

Remove self-locking nuts.

Bolt, stabilizer bearing bracket to chassis

*BA32.35-N-1003-03H

5

Install in the reverse order

Rear axle stabilizer bar

Number

Designation

Model
613.364/
365

BA32.35-N-1001-03H

Castle nut, stabilizer bar strut to stabilizer bar

Nm

195

BA32.35-N-1003-03H

Bolt, stabilizer bearing bracket to chassis

Nm

180

BA32.35-N-1004-03H

Castellated nut connecting anti-roll bar rod to spring mount

Nm

195

Odkazované dokumenty