AR32.35-T-2210AA | Remove/install anti-roll bar on rear axle | 12.6.01 |
MODELS 671.015 /020 /021 /030 /042 /332 /333
T32.35-0002-11
1 Stabilizer strut
2 Stabilizer strut bearing bracket
3 Stabilizer
4 Bearing bush of anti-roll bar
| Remove/Install | ||
Installation: | Self-locking bolts and nuts must be renewed and wear parts must be checked for re-usability. | ||
1 | Raise the vehicle, place on axle stands | ||
2 | Unscrew stabilizer strut (1) from stabilizer strut bearing bracket (2). | Stabilizer must not be under tension. Removal: Use a suitable tool, pull off stabilizer strut and secure stabilizer to prevent it from falling down. | |
| |||
3 | Unscrew stabilizer strut (1) from stabilizer (3) and remove | Removal: Pull off stabilizer strut using a suitable tool. | |
| |||
4 | Unscrew stabilizer bearing bush (4) from stabilizer bearing bracket. | ||
5 | Remove stabilizer (3) with bearing bush (4). | ||
6 | Unscrew stabilizer bearing bush (4) from stabilizer (3). | Only tighten stabilizer bearing bush nuts when rubber mount is free of tension. | |
7 | Install in the reverse order |
Rear axle anti-roll bar
Number | Designation | models | Model | models | models | Model | |
BA32.35-N-1001-03I | Nut, stabilizer strut to stabilizer strut bracket | NM | 230...285 | 230...285 | 230...285 | 230...285 | 230...285 |
BA32.35-N-1002-03I | Nut stabilizer to stabilizer strut | NM | 230...285 | 230...285 | 230...285 | 230...285 | 230...285 |