601 589 04 43 00
Insertion device
D32.35-0024-01
D32.35-0034-01
Removing
1 Use a suitable drift to press bearing bush in torsion bar and connecting rods out of bearing bosses.
2 Unscrew nuts (8) and take off bolts (11) together with washers (10).
D32.35-0032-01
D32.35-0033-01
3 Pull bracket (7) out of clamp (12).
4 Pull clamp (12) off rubber mount.
5 Take off rubber mount (13).
D32.35-0032-01
D32.35-0035-01
Installing
Replace rubber mount
1 Coat rubber mount with assembly oil.
2 Draw rubber mount into anti-roll bar and connecting rods .
3 Coat rubber mount (13) with assembly oil or talcum.
D32.35-0027-01
D32.35-0033-01
4 Fit rubber mount (13) onto torsion bar and pull on clamp (12).
5 Insert bracket (7) into clamp (12).
6 Fit on bolted connection of clamp and bracket, do not tighten.