ar3225b0110xb

Remove/install rear shock absorber

Typ ar · téma 32.25 · verze 0101 · 2020-03-10

Platí pro: Model 384.0/2/3

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 32 Odpružení › 32.25 Tlumič pérování, tlumiče, pružicí jednotky — Řada 384 (modely 0**, 2**, 3**)

EinPAS 20 Podvozek › 20.16 Odpružení › 20.16.30 Pružina/měch vzduchového odpružení/tlumič/pružinová vzpěra — Řada 384 (modely 0**, 2**, 3**)

AR32.25-B-0110XB

Remove/install rear shock absorber

18.02.2020

Model

384.0/2/3

Remove/install rear shock absorber

Rear damper

1

Rear shock absorbers

2

Rear axle

3

Platter

4

Shock absorber lower support

5

Top mounting bolt

6

Bottom mounting bolt

B32.25-0007-02

Remove/install

1

Place the vehicle on a level, flat location. Chock the front wheels to avoid the accidental displacement of the vehicle

On laden vehicles, greater care is required during the works.

2

Disconnect the negative battery cable or turn off the main switch

Loosen the screw from the negative cable on the stringer to prevent the battery terminals from getting loose.

Do not lift the vehicle by the axle center to avoid serious axle damage.

Excessive strokes may damage the dampers.

3

Remove the self-locking nuts (5), the top and bottom mounting bolts (6) and then, remove the shock absorber (1)

If necessary, replacing the front dampers always in pairs on the same axle is advisable.

Installation: Apply new self-locking nuts and tighten them to the specified torque.

.Rear shock absorbers' nuts

*BA32.25-B-1001-03A

4

Remove the mounts and with the bushings from the shock absorber (1) eyelets

Installation: To install the mounts and bushings, lubricate them with a thin layer of petroleum jelly and use a press.

Vaseline

*BR00.45-Z-1015-06A

Check

5

Check conditions of the shock absorbers (1)

Replace the shock absorbers (1) in cases of:

- Signs of leaks.
- Dented body.
- Loose or deformed adapters.
- Damaged mounts.

6

Install the shock absorbers (1) in reverse order

7

Run a test drive

Check the vehicle's behavior.

Rear axle shock absorbers

Number

Designation

Model 382, 384 (except 384.065), 386, 682, 693 (except 693.154/193/194/196/197), 694, 695

Model 368.0/115

BA32.25-B-1001-03A

Rear shock absorbers' nuts

M12x1.5

Nm

-

-

M14x15- steel 8

Nm

-

-

M14x1,5 (ISO)

Nm

-

-

M16x1,5 - steel 8

Nm

225

-

M16x1,5 - with flange

Nm

177

-

M16x1.5

Nm

-

-

M16x2 (ISO)

Nm

-

M20x1,5 - steel 8

Nm

290

-

M20x1,5 - steel 10

Nm

520

290

M24x2- steel 10.9

Nm

-

-

Repair materials

Number

Designation

Order number

BR00.45-Z-1015-06A

Vaseline

Friedrich Scharr KG
Liebknechtstr. 50
70565 Stuttgart, Germany
Tel. +49 711 7868-481
Fax +49 711 7868-489
www.scharr.de