Change parameters for the OBD NOx control torque limitation in the drive
control(FR) control unit
Typ ar · téma 30.35 · verze 0100 · 2019-09-24
Platí pro: Engine 900.9, 902.9, 924.9, 926.9 in model 000.001 with on-board diagnosis with NOx control Engine 925.9 in model 000.001 with on-board diagnosis with NOx control
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Platí také pro motory/převodovky: 924 9**, 925 9**, 926 9**
AR30.35-G-1200DD
Change parameters for the OBD NOx control torque limitation in the drive control(FR) control unit
28.08.2019
Engine
900.9, 902.9, 924.9, 926.9 in model 000.001
with on-board diagnosis with NOx control
Engine
925.9 in model 000.001
with on-board diagnosis with NOx control
Parameterization
1
Connect diagnostic system.
See information from body manufacturer.
2
Switch on ignition.
See information from body manufacturer.
3
Start diagnostic system.
Then select Industrial engines Control unit direct access FR drive control Control unit adaptations Parameterization Vehicle parameters NOx torque limitation and parameter 043.008.
4
Select and confirm corresponding value in menu.
A 4digit random number, 8digit ID code and the calculation type XT are shown in the vehicle diagnosis system.
5
Enter the 4digit random number, 8digit ID code and calculation type XT in the VeDoc screen 1801.
Once the data have been input, VeDoc outputs a 12digit encrypted random number.
6
Enter 12digit encrypted random number in vehicle diagnosis system.