Remove idle speed control (ISC) actuator, install

Typ ar · téma 30.22 · verze 0101 · 2004-04-15

Platí pro: ENGINE 111.984 in MODEL 902.612 /661 /662 /672, 903.612 /613 /622 /661 /662 /663 /672 /673, 904.612 /613 /662 /663 with CODE (MS7) NGT (Natural Gas Transporter) sprinter

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

AR30.22-D-1152D

15.11.00

ENGINE 111.984 in MODEL 902.612 /661 /662 /672, 903.612 /613 /622 /661 /662 /663 /672 /673, 904.612 /613 /662 /663 with CODE (MS7) NGT (Natural Gas Transporter) sprinter

Remove idle speed control (ISC) actuator, install

D30.22-1103-12

1 Idle speed control actuator

2 Connector

3 Screw

 	Remove/install
1	Remove air intake hose		AR09.10-D-8030F
2	Undo connector (2)
3	Unscrew four bolts (3), take idle speed control actuator (1) off the intermediate flange at the intake manifold		*BA30.22-N-1001-01A
4	Install in the reverse order

 Idle speed control (ISC)

Number	Designation		Engine 111.979/ 984


BA30.22-N-1001-01A	Idle speed control (ISC) actuator to intermediate flange	Nm	10

Odkazované dokumenty

ar0910d8030f