Detaching and attaching idle speed control (ISC) actuator at intermediate flange

Typ ar · téma 30.22 · verze 0102 · 2000-02-08

Platí pro: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 30 Regulace, rychlostní regulace › 30.22 Regulace volnoběhu (LLR) — Řada 901 (modely 0**) · Řada 902 (modely 0**) · Řada 903 (modely 0**) · Řada 904 (modely 0**)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.31 Servomotor/nastavovací člen/regulátor směsi — Řada 901 (modely 0**) · Řada 902 (modely 0**) · Řada 903 (modely 0**) · Řada 904 (modely 0**)

Platí také pro motory/převodovky: 111 979

AR30.22-D-1152-01C

Detaching and attaching idle speed control (ISC) actuator at intermediate flange

 Idle speed control (ISC))

Number	Designation		Engine 111.979/ 984


BA30.22-N-1001-01A	Idle speed control (ISC) actuator at intermediate flange	Nm	10

D30.22-1002-01

1 Detach connecting rod (2) at throttle valve lever.

 Installation: After attaching the connecting rod (2) the throttle valve lever must be positioned against the microswitch (arrow).

2 Detach restoring spring (3) at throttle valve lever.

3 Take off vacuum line (1) at idle speed control actuator.

D30.22-1003-01

4 Unscrew hexagon socket bolts (4) and place idle speed control actuator (5) to the side with electrical connection.

 Installation: Pay attention to  tightening torque.

5 Install in the reverse order.