ar3012p1321gr

Remove/install accelerator pedal

Typ ar · téma 30.12 · verze 0105 · 2006-10-11

Platí pro: ENGINE 112.945 in MODEL 463.244 /245 /250 ENGINE 113.962 in MODEL 463.247 /248 /249 /254 ENGINE 113.982 in MODEL 463.243 /246 ENGINE 612.965 in MODEL 463.322 /323 ENGINE 628.962 in MODEL 463.309 /332 /333 ENGINE 113.993 in MODEL 463.270 /271 ENGINE 642.970 in MODEL 463.303 /340 /341

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 30 Regulace, rychlostní regulace › 30.12 Regulace - na straně podvozku — Řada 463 (modely 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 303, 309, 322, 323, 332, 333, 340, 341) · Řada 628 (modely 962)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.35 Regulace motoru — Řada 463 (modely 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 303, 309, 322, 323, 332, 333, 340, 341) · Řada 628 (modely 962)

Platí také pro motory/převodovky: 112 945, 113 962, 113 982, 113 993, 612 965, 642 970

AR30.12-P-1321GR

Remove/install accelerator pedal

25.6.01

ENGINE 112.945 in MODEL 463.244 /245 /250

ENGINE 113.962 in MODEL 463.247 /248 /249 /254

ENGINE 113.982 in MODEL 463.243 /246

ENGINE 612.965 in MODEL 463.322 /323

ENGINE 628.962 in MODEL 463.309 /332 /333

ENGINE 113.993 in MODEL 463.270 /271

ENGINE 642.970 in MODEL 463.303 /340 /341

Remove/install accelerator pedal

P30.12-2009-08

24/3 Spreading clip

3 Recess

4 Cam

1 Accelerator pedal

2 Accelerator pedal lever

Remove/Install

1

Pull out the spreading clip (24/3) backwards

2

Detach bottom end of accelerator pedal (1)

3

Turn the accelerator pedal (1) at the accelerator pedal lever (2) to the left

Turn until the recess (3) in the accelerator pedal (1) is over the cam (4) on the accelerator pedal rod (2).

4

Remove accelerator pedal (1)

For this, detach the accelerator pedal (1) from the accelerator pedal lever (2).

5

Install in the reverse order