Adjustment of control pressure cable

Typ ar · téma 30.10 · verze 0103 · 2000-02-02

Platí pro: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 with TRANSMISSION 722.376 with CODE (G40) Automatic transmission W4A028

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 30 Regulace, rychlostní regulace › 30.10 Mechanická regulace — Řada 901 (modely 0**) · Řada 902 (modely 0**) · Řada 903 (modely 0**) · Řada 904 (modely 0**)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.35 Regulace motoru — Řada 901 (modely 0**) · Řada 902 (modely 0**) · Řada 903 (modely 0**) · Řada 904 (modely 0**)

Platí také pro motory/převodovky: 111 979, 722 376

AR30.10-D-1010-12A

Adjustment of control pressure cable

D30.10-0010-01

1 Detach control pressure bowden cable (1) at ball head and move accelerator pedal into CTP position.

D30.10-0011-01

2 Push control pressure bowden cable back (arrow) and then pull forward again until a resistance is felt (relay lever in transmission is resting against control pressure slide).
Adjust control pressure bowden cable by turning the adjusting screw (2) so that it can be pressed onto the ball head at the throttle control lever free of stress.