ar3010d101011d

Adjusting throttle control for wide open throttle

Typ ar · téma 30.10 · verze 0101 · 2000-02-24

Platí pro: ENGINE 602.980 in MODEL 901.4, 902.4, 903.4, 904.4 with TRANSMISSION 711.603 /612

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 30 Regulace, rychlostní regulace › 30.10 Mechanická regulace — Řada 602 (modely 980) · Řada 901 (modely 4**) · Řada 902 (modely 4**) · Řada 903 (modely 4**) · Řada 904 (modely 4**)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.35 Regulace motoru — Řada 602 (modely 980) · Řada 901 (modely 4**) · Řada 902 (modely 4**) · Řada 903 (modely 4**) · Řada 904 (modely 4**)

Platí také pro motory/převodovky: 711 603, 711 612

AR30.10-D-1010-11D

Adjusting throttle control for wide open throttle

Adjusting throttle control for wide open throttle

D30.10-0006-01

1 Place a 3 mm thick washer (arrow) between accelerator pedal (1) and WOT stop (2) and depress accelerator pedal to "WOT position".

Adjusting throttle control for wide open throttle

D30.10-0007-01

2 Release clip in mount at accelerator pedal (1) and pull into WOT position (arrow). Lock the moving detent tongues in this position.

Relay lever of pedal value sensor moves against WOT stop. Do not overtension throttle control.

Adjusting throttle control for wide open throttle

D30.10-0009-01

3 Release accelerator pedal and remove washer.

4 Once again depress accelerator pedal (1) and check WOT position. Play between accelerator pedal and WOT stop (2) 3 1 mm.
Repeat setting if necessary.