ar3010d101011c

Adjusting throttle control for wide open throttle

Typ ar · téma 30.10 · verze 0101 · 2000-02-02

Platí pro: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 with TRANSMISSION 711.603 /612

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 30 Regulace, rychlostní regulace › 30.10 Mechanická regulace — Řada 901 (modely 0**) · Řada 902 (modely 0**) · Řada 903 (modely 0**) · Řada 904 (modely 0**)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.35 Regulace motoru — Řada 901 (modely 0**) · Řada 902 (modely 0**) · Řada 903 (modely 0**) · Řada 904 (modely 0**)

Platí také pro motory/převodovky: 111 979, 711 603, 711 612

AR30.10-D-1010-11C

Adjusting throttle control for wide open throttle

Adjusting throttle control for wide open throttle

D30.10-0006-01

1 Place a 3 mm thick washer (arrow) between accelerator pedal (1) and WOT stop (2). Press accelerator pedal to "WOT position".

Adjusting throttle control for wide open throttle

D30.10-0007-01

2 Release clip in mount at accelerator pedal (1) and pull into WOT position (arrow). Lock the moving detent tongues in this position.

Do not overtension throttle control.

Adjusting throttle control for wide open throttle

D30.10-0008-01

3 Release pressure again on the accelerator pedal (1) and move idle speed nut (3) at bowden cable against the stop.

Adjusting throttle control for wide open throttle

D30.10-0009-01

4 Remove washer. Once again depress accelerator pedal (1) fully and check WOT position. Play between accelerator pedal and WOT stop (2) 3 1 mm.
Repeat setting if necessary.