ar3010d101010a
Adjusting throttle control for idle speed
Typ ar · téma 30.10 · verze 0104 · 2000-02-02
Platí pro: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 1 Motor › 30 Regulace, rychlostní regulace › 30.10 Mechanická regulace — Řada 901 (modely 0**) · Řada 902 (modely 0**) · Řada 903 (modely 0**) · Řada 904 (modely 0**)
EinPAS 15 Motor › 15.45 Management motoru › 15.45.35 Regulace motoru — Řada 901 (modely 0**) · Řada 902 (modely 0**) · Řada 903 (modely 0**) · Řada 904 (modely 0**)
Platí také pro motory/převodovky: 111 979
AR30.10-D-1010-10A
| Adjusting throttle control for idle speed
|
|
|
Mechanical throttle control
Number
| Designation
| Engine 111.979
|
|
|
|
|
|
|
|
|
|
|
BA30.10-N-1003-01A
| Clamping bolt to connecting rod
| Nm
| 3.5
|
Settings of mechanical throttle control
Number
| Designation
| Engine 111.979
|
|
|
|
|
|
|
|
|
|
|
BE30.10-N-1002-01A
| Play between fulcrum track and roller
| mm
| 0.5
|
1 Slacken clamping bolt (arrow) and connecting rod.
2 Turn bell crank lever (1) at throttle valve positioning motor to idle speed end stop (arrow).
The idle speed switch must be operated.
3 Turn fulcrum lever (2) in anti-clockwise direction until roller (3) is touching the idle speed end stop in the fulcrum without any stress.
Pay attention to setting between roller and fulcrum track.
4 After setting, tighten clamping bolt (arrow) .
