Remove/install pedal assembly · ar2910p0300t · Mercedes-Benz WIS

AR29.10-P-0300T

Remove/install pedal assembly

15.6.09

MODEL 211 with TRANSMISSION 716.6 except CODE (424) Sequentronic automated manual transmission (SEQ)

P29.10-2031-09

1 Front cover

2 Pin

3 Master cylinder

3a Nut

S9/1 Stop lamp switch

S40/3 Clutch pedal switch

4 Pedal assembly

5 Stud

6 Collar nut

7 Rear cover

 	Remove/install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Remove left cover below dashboard		AR68.10-P-1500T
2	Remove stop lamp switch (S9/1)		AR42.10-P-0040I
3	Remove clutch pedal switch (S40/3)	 Press the locking catch and turn the clutch pedal switch (S40/3) clockwise through 90°.
4	Unclip and remove front cover (1).
5	Lever out bolt (2).	 Check bolt for damage and wear, replace if necessary.
		 Installation: apply light coating of grease to pin.
		Long-life grease	*BR00.45-Z-1001-06A
6	Disconnect master cylinder (3) from pedal assembly (4)	 Installation: install new nuts (3a).
		 Do not disconnect lines from master cylinder.
		 Nut, master cylinder to pedal bracket	*BA25.20-P-1001-01A
7	Remove stud (5).	 Check stud for damage and wear, replace if necessary.
8	Unscrew collar nuts (6).
9	Unclip pedal assembly (4) from rear cover (7) and remove.
10	Install in the reverse order

 Clutch operating mechanism

Number	Designation		Model 211


BA25.20-P-1001-01A	Nut, master cylinder to pedal bracket	Nm	13

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51 11