Test values for transfer case gear set, shafts
Number | Designation | Model 461, 463 | |
BE28.50-P-1013-01A | Preload of tapered roller bearing of differential | mm | 0,1 (0,05) |
463 589 05 34 00
Puller arms
Two-armed puller
000 589 88 33 00
P28.40-2088-01
1 Remove bearing outer race (2) from bearing cap (1).
Note shims.
P28.50-2004-01
2 Carefully press new bearing outer race (2) with shims (3) and also 1 mm thick shim into bearing cap.
P28.50-2005-01
3 Mount bearing cap and tighten with 3 opposite bolts on the intermediate flange to 5 Nm.
In the process spin the bearing Approx..10-times.
P28.50-2006-01
4 Measure gap (4) at several places using feeler gauge and record value.
5 Set preload of tapered roller bearings
Calculation example: Gap (mean value) 0,80 mm
Preload (nominal value) -0,10 MM
Calculation result 0.70 mm
The result of the calculation reveals that the thickness of the shims must be reduced by 0.70 mm.
Shims are available in thicknesses of 0.1 mm, 0.15 mm, 0.3 mm, and 1.0 mm.
P28.50-2007-01
6 Remove bearing outer race (arrow) from bearing cap and reinstall with shims of determined thickness.
Install the thicker shim on the side closest to the cap.