Remove/install floor selector · ar2760p0900gm · Mercedes-Benz WIS

AR27.60-P-0900GM

Remove/install floor selector

20.4.01

TRANSMISSION 722.610 in MODELS 463.209 /232 /233

TRANSMISSION 722.611 in MODELS 463.308 /330 /331

TRANSMISSION 722.630 in MODELS 463.206 /240 /241

P27.60-2406-06

Shown on floor shift with W/S switch

39 Gasket

40 Hexagon socket bolts

(4 ea.)

97 Intermediate lever

S16/10 Transmission range recognition switch

S16/10s1 Reverse lamp switch

Y66/1 Reverse/parking lock valve

 	Remove/Install
1	Disconnect shift rod from intermediate lever (97)	 Remove clip retainer. If adjusting:
		Adjust shift rod.	AR27.60-P-0980B
2	Remove center console		AR68.20-P-2000A
3	Unscrew hexagon socket bolts (40)		*BA27.60-P-1001-02A
4	Unplug connectors	 from transmission range recognition switch (S16/10) backup lamp switch (S16/10s1) and reversing/park pawl valve (Y66/1)
5	Remove floor shift	 Disassemble and assemble floor shift according to condition.	AR27.60-P-0920B
		 Installation: Check gasket (39) for correct installation position and condition, replace if necessary.
6	Install in the reverse order	After installing the floor shift, read out and erase the fault code using the HHT, refer to DM Chassis Volume 1 - Index 0.

Floor selector tightening torque