AR27.60-D-1475B | Setting selector lever control cable | 12.12.97 |
TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission
TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission
D27.60-0022-06
1 Housing with actuator motor and segment switch
2 Shift position 2
3 Shift position 3
4 Shift position 4
5 Selector lever control cable
6 Locking device for selector lever control cable
7 Hexagon bolt
8 Hexagon nut
9 Selector lever control cable bracket
10 Range selector lever
11 Hexagon bolt
12 Hexagon nut
N Shift position N
P Shift position R
R Shift position P
| Starter lock-out switch is correctly adjusted | ||
Adjusting | |||
1 | Remove driver's seat | ||
2 | Detach selector lever control cable (5) from range selector lever (10) and place range selector lever in position "4" | ||
3 | Detach selector lever control cable (5) from actuator motor | ||
4 | Loosen hexagon bolt (7) | ||
5 | Ignition: ON | ||
6.1 | Switch touch shift to stage "4" | Transmission 722.337 The actuator motor must move to position 4 | |
6.2 | Switch touch shift to stage "D" | Transmission 722.332 The actuator motor must move to position 4 | |
7 | Check adjustment of actuating lever | ||
8 | Ignition: OFF | ||
9 | Attach selector lever control cable (5) to actuator motor | ||
10 | Adjust selector lever control cable (5) by moving in the bracket (9) and press on. | It must be possible to press the ball socket of the selector lever control cable (5) onto the ball head of the range selector lever (10) free from tension. | |
11 | Attach selector lever control cable (5) to range selector lever (10) | ||
12 | Clamp selector lever control cable (5) securely in bracket (9) | | |
13 | Move through all selector positions one after the other |
Shift, control