Remove/install right oil lines from dual-clutch transmission to connecting point

AR27.55-P-0613MNB

Remove/install right oil lines from dual-clutch transmission to connecting point

24.03.2020

Transmission

700.4 in model 190

1

Screw

3

Separating points

4

Oil pressure switch

2

Bracket

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

General information on repair work on transmission

AH27.00-S-1000-01PS

 

Remove/install

1

Remove exhaust system.

Transmission 700.4 in model 190.379/380/477/478/479/480

AR49.10-P-7142MNC

Transmission 700.4 in model 190.377/378/381

AR49.10-P-7142MNB

 Installation: Install underfloor paneling at rear only after leak test.

2

Release and disconnect electrical connector from oil pressure switch (4).

3

Remove brackets (2).

4

Open connecting points (3) and seal openings with suitable stop plugs.

AR27.10-P-0501-03LF

 Installation: Replace seals.

 Record plug

*129589009100

5

Remove screw (1).

6

Remove oil lines and seal with suitable stop plugs.

 Installation: Replace seals.

 Record plug

*129589009100

7

Install in the reverse order.



Check

8

Check and correct oil level in automatic transmission.



AP27.00-P-2701RQ

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Perform engine test run, check oil lines for leak tightness.

10

Install rear underfloor paneling.

AR61.30-P-1001RG