Steering gear
Number | Designation | Models | Model | ||
BA46.20-N-1003-01C | Bolt, steering to front axle | 1st stage | Nm | 25 | 25 |
2nd stage | Nm | 45 | 45 | ||
Step 3 | ° | 90 | 90 | ||
Torque converter
Number | Designation | Transmission 722.681 | |
BA27.20-N-1002-01A | Bolt, torque converter to driver plate | Nm | 50 |
D27.20-1101-05
1 Unscrew steering (1) from axle housing.
Installation: Replace hex. nuts. Retainer (2) must not touch side of housing.
2 Lower steering (1) downwards.
D27.20-1102-12
3 Remove plastic cover (3) on the back of the engine flange.
4 Rotate engine by hand until bolts (4) are in front of opening.
Rotate engine forwards at crankshafts.
D27.20-1103-06
5 To remove bolts, position a ratchet with long extension and joint nut as shown.
6 Unscrew 3 x 2 bolts (4) at circumference of driving plate.
7 Installation in the reverse sequence
5 Anti-roll bar
6 Reinforcement plate
7 Opening in oil pan
8 Front axle crossmember
9 Steering gear