Remove/install inductive sensor (turbine rpm)

AR27.19-T-0900AC

22.2.07

TRANSMISSION 721.108 /109 /141 /151 /181 /182

T27.19-0030-01

1 Screw plug

2 Transfer plate

3 Flat-pin connector

4 Torx bolt

5 Inductive sensor

T27.19-0031-01

 	Remove/install
1	Remove oil pan		AR27.10-T-7030A
2	Unscrew screw plug (1) from transfer plate (2)		*BA27.19-N-1005-02D
3	Detach flat-pin connector (3) from inductive sensor (5)	 Pull on the flat-pin connectors, not on the cable, using suitable pliers.
4	Unscrew inductive sensor torx bolt (4) and remove inductive sensor (5)		*BA27.19-N-1014-02D
		 Installation: When replacing inductive sensor, determine thickness of shims:
		Adjusting inductive sensor (turbine rpm)	AR27.19-T-0900-01AC
			*BE27.19-N-1001-01B
		Measuring rod, ZF-Friedrichshafen AG, D-88046 Friedrichshafen, Germany
		Test device, ZF-Friedrichshafen AG, D-88046 Friedrichshafen, Germany
		Adjusting disk, ZF-Friedrichshafen AG, D-88046 Friedrichshafen, Germany
5	Install in the reverse order

Test and adjustment values for automatic transmission

Number	Designation		Trans-mission 721.141	Trans-mission 721.108	Trans-mission 721.109	Trans-mission 721.151/ 181/182


BE27.19-N-1001-01B	Adjustment dimension for inductive sensor (turbine rpm)	mm	0.6...0.7	0.6...0.8	0.6...0.8	0.6...0.7

 Electrical system, transmission

Number	Designation		Trans-mission 721.141	Trans-mission 721.108	Trans-mission 721.109	Trans-mission 721.151/ 181/182


BA27.19-N-1005-02D	Bolt, inductive sensor cap (turbine rpm)	Nm	10	10	10	10
BA27.19-N-1014-02D	Bolt, inductive sensor (turbine wheel rotational speed) to transfer plate	Nm	10	10	10	10