Oil pan
Number | Designation | Engine 612.981 | Engine 647.981 | ||
BA01.45-N-1001-01H | Bolt, oil pan to crankcase | M6 | Nm | 9 | 9 |
M8 | Nm | 20 | 20 | ||
M10 | Nm | - | - | ||
Automatic transmission complete
Number | Designation | Trans-mission | ||
BA27.10-N-1004-04B | Bolt, oil line to transmission housing | M10 | Nm | 34 |
D27.10-1103-06
Shown on right-hand side of engine
1 Detach brackets of oil cooler lines (1) on left and right of engine oil pan.
Observe installation position of brackets of oil cooler-lines (1).
D27.10-1104-01
2 Detach oil cooler-line (1) on the right-hand side of transmission
Installation: Replace seals.
3 Turn locking ring (3) counterclockwise and pull off electrical plug (2) on transmission.
D27.10-1105-01
4 Unscrew one bolt on the right and left of the cable duct (4) on the crankcase.
5 Unhook bracket of cable duct (4) from the free standing threaded shank of the engine oil pan bolt (5) of the engine.
6 Press away cable duct (4) downwards.
D27.10-1106-01
7 Detach oil cooler-line (6) from the left-hand side of the transmission.
Installation: Replace seals.
8 Install in reverse order.