ar2710d0260a

Removing and installing vacuum unit

Typ ar · téma 27.10 · verze 0104 · 1999-10-01

Platí pro: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979 TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx supply

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 27 Automatická převodovka › 27.10 Převodovka kompletní — Řada 601 (modely 943) · Řada 602 (modely 980) · Řada 901 (modely 06*, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 312, 362, 4**, 462, 463) · Řada 904 (modely 0**, 4**)

EinPAS 17 Hnací ústrojí/náprava › 17.35 Řazení/řízení převodových stupňů › 17.35.43 Nastavovací člen/hydraulická jednotka/nastavovač převodovky — Řada 601 (modely 943) · Řada 602 (modely 980) · Řada 901 (modely 06*, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 312, 362, 4**, 462, 463) · Řada 904 (modely 0**, 4**)

Platí také pro motory/převodovky: 111 979, 722 330, 722 332, 722 337, 722 375, 722 376

AR27.10-D-0260A

Removing and installing vacuum unit

10.4.96

TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943

TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980

TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office

TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx supply

Removing and installing vacuum unit

D27.10-0001-06

1 Modulating pressure regulating valve

2 Spring

3 Thrust pin for thermal expansion compensation

4 Retaining plate

5 Sealing ring

6 Vacuum unit

7 Washer

8 Hexagon socket bolt

Removal, installation

1

Pull off vacuum line (arrow)

Installation: Check for leaks and porous points

2

Detach retaining plate (4).

Detach hexagon socket bolts (8) with washer (7) and remove retaining plate (4).

3

Pull out vacuum unit (6) with sealing ring(5).

Installation: Replace sealing ring (5).

4

Detach modulating pressure regulating valve (1).

Pull out thrust pin (3), spring (2) and modulating pressure regulating valve (1).

Installation: The thrust pin (3) must be cleaned and checked for ease of movement.

5

Install in reverse order.