Shift mechanism
714 589 06 21 00
Measuring plate
Adjustment gauge
714 589 00 21 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1047-02A | Locking compound Precode 80 red | - |
T26.60-0013-01
1 Install measuring plate (1) on the adjustment gauge (2).
2 Screw setting gauge (2) onto external bearing cover of shift mechanism.
Checking
3 Using a feeler gauge , check the gap between the setting gauge (2) and the shift finger (3) on both sides (arrows) of the shift finger (3).
The two gaps must be the same size otherwise they must be adjusted.
T26.60-0014-01
Adjust
4 Heat up both grub screws (arrow) with the hot air gun
The grub screws (arrow) are secured with locking compound and can only be loosened after heating.
5 Adjust the two gaps by twisting the two grub screws (arrow) on the notch lever.
6 Tighten the two grub screws (arrow) alternately in stages.
7 Check the two gaps again and repeat the adjustment if necessary.
8 Secure both grub screws (arrows) with locking agent.