000 589 27 33 00
000 589 33 33 00
Bracing tool
Puller
S26.50-3023-11
Removing
1 Remove locking ring (3).
2 Remove ball bearing (2), to do this, heat up clutch housing (1) to approx.
Use internal extractor and countering support if necessary.
Installing
3 Install ball bearing (2), to do this, heat up clutch housing (1) to approx. 80-100°C and insert ball bearing (2).
After cooling, continue driving on ball bearing (2) using a suitable drift punch at the outer race if necessary.
4 Install locking ring (3).