S26.50-3013-11
Disassembling
1 Take the sliding sleeve (4) out of the synchroniser body (1).
Pay attention to the balls that drop!
2 Take the springs (2) out of the synchroniser body (1).
Assembling
3 Press the sliding sleeve (4) onto the synchroniser body (1) making sure that the groove (arrow) coincides with the 3rd gear.
There is a machined part with a group of three teeth on the sliding sleeve (4)
The tooth with the deepest notch (arrow) of the sliding sleeve (4) must be placed in the centre of the notch of the synchroniser body (1).
4 Insert the springs (2) into the notch of the synchroniser body (1)
5 With a suitable too, compress the springs (2) and insert the balls (3)
6 Insert the 4th gear synchroniser ring, counterpress and place the sliding sleeve (4) in neutral position.