000 589 31 33 00
000 589 34 33 00
Countering support
Internal extractor
S26.50-3032-11
Removing
1 Remove roller bearing outer race (2), to do this, heat up clutch housing (1) to approx. 80-100°C and hammer onto a wooden plate.
Use internal extractor and countering support if necessary.
Installing
2 Install roller bearing outer race (2), to do this, heat up clutch
housing (1) to approx. 80-100°C and insert roller bearing outer race (2).
After cooling, continue driving on as far as the stop using a suitable drift punch if necessary.