ar2650d200101a

Adjust main shaft bearing play

Typ ar · téma 26.50 · verze 0108 · 2006-07-26

Platí pro: TRANSMISSION 711.603 /605 /612 /613 /620 /621 TRANSMISSION 711.620 in MODEL 690.6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 26 Mechanická převodovka › 26.50 Soukolí, hřídele, diferenciál — Řada 690 (modely 6**)

EinPAS 17 Hnací ústrojí/náprava › 17.20 Převodovka › 17.20.50 Hřídel/ozubené kolo/synchronizace — Řada 690 (modely 6**)

Platí také pro motory/převodovky: 711 603, 711 605, 711 612, 711 613, 711 620, 711 621

AR26.50-D-2001-01A

Adjust main shaft bearing play

Adjustment data for ring gear and pinion

Number

Designation

Transmission 711.603

Transmission 711.612 /613

Transmission 711.605

BE26.50-N-1001-01D

Axial play between main shaft and circlip.

mm

0.02-0.08

0.02-0.08

0.02-0.08

Adjustment data for ring gear and pinion

Number

Designation

Transmission
711.620/621

BE26.50-N-1001-01D

Axial play between main shaft and circlip.

mm

0.02...0.08

Commercially available tools

Number

Designation

WH58.30-Z-1004-12A

Feeler gauge

Adjust main shaft bearing play

D26.50-0044-01

1 Measure axial play between main shaft bearing (24) and circlip (23),

(specification see table).

2 If measured value does not match desired value, remove circlip (23) and measure thickness.

3 Determine thickness of new circlip (23).

Circlips are available in thicknesses of 2.68, 2.74, 2.80, 2.85, and 2.9 mm.

4 Install the correct circlip (23).

5 To check axial play between main shaft bearing (24) and circlip (23) measure again, repeat adjustment procedure if necessary.