Shafts
Número | Denominação | Gearbox 712.62/64 715.054 | Gearboxes 712.63, 715.064 | |||
BE26.50-B-1001-03F | Reserve of synchronization | First gear- minimum dimension | mm | 0,7 | 0,7 | |
First gear - established dimension | mm | 2,0 | 2,0 | |||
Second gear - minimum dimension | mm | 0,7 | 0,7 | |||
Second gear - established dimension | mm | 2,0 | 2,0 | |||
Third gear - minimum dimension | mm | 0,7 | 0,7 | |||
Third gear - established dimension | mm | 2,0 | 2,0 | |||
Fourth gear- minimum dimension | mm | 0,7 | 0,7 | |||
Fourth gear - established dimension | mm | 2,0 | 2,0 | |||
Fifth gear- minimum dimension | mm | 0,5 | 0,5 | |||
Fifth gear - established dimension | mm | 1,5 | 1,5 | |||
Sixth gear - minimum dimension | mm | 0,5 | 0,5 | |||
Sixth gear - established dimension | mm | 1,5 | 1,5 | |||
W26.50-1144-01
Synchronizing reserve of 1st, 2nd, 3rd and 4th speed (dual synchronization)
1 Place the external synchronizing cone (1) and the synchronizing ring (3) and the internal synchronizing cone (2) in the gear (4), align parallel and slightly compress.
2 Using a feeler gauge, check the play between the external synchronizing cone (1) and the gear (4) in two opposite points.
3 Compare the measurement determined with the table, if the value is not reached, replace the synchronizing assembly.
W26.50-1145-01
Synchronizing reserve of 5th and 6th gears (single synchronization)
4 Place the synchronizing ring (5) in the gear (6), align parallel and slightly compress.
5 Using a feeler gauge, check the play between the synchronizing ring (5) and the gear (6) in two opposite points.
6 Compare the measurement determined with the table, if the value is not reached, replace the synchronizer.