ar2645d001515a

Adjust axial play of drive plate

Typ ar · téma 26.45 · verze 0107 · 2008-12-02

Platí pro: TRANSMISSION 711.612 in MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (N07) Power take-off countershaft (2b) with flange with CODE (N05) Power take-off countershaft (2c) without flange TRANSMISSION 711.613 in MODEL 667, 668, 670 with CODE (N07) Power take-off countershaft (2b) with flange with CODE (N05) Power take-off countershaft DB, (2c) TRANSMISSION 711.620 in MODEL 901.6, 902.6, 903.6, 904.6 with CODE (N07) Power take-off countershaft (2b) with flange with CODE (N05) Power ta

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 26 Mechanická převodovka › 26.45 Pomocný pohon, převodovka vývodového hřídele — Řada 667 · Řada 668 · Řada 670 · Řada 901 (modely 0**, 3**, 4**, 6**) · Řada 902 (modely 0**, 3**, 4**, 6**) · Řada 903 (modely 0**, 3**, 4**, 6**) · Řada 904 (modely 0**, 3**, 4**, 6**) · Řada 905 (modely 6**)

EinPAS 17 Hnací ústrojí/náprava › 17.45 Vedlejší pohon › 17.45.60 Hřídel/ozubené kolo/synchronizace/příruba — Řada 667 · Řada 668 · Řada 670 · Řada 901 (modely 0**, 3**, 4**, 6**) · Řada 902 (modely 0**, 3**, 4**, 6**) · Řada 903 (modely 0**, 3**, 4**, 6**) · Řada 904 (modely 0**, 3**, 4**, 6**) · Řada 905 (modely 6**)

Platí také pro motory/převodovky: 711 612, 711 613, 711 620, 711 621

AR26.45-D-0015-15A

Adjust axial play of drive plate

Adjustment values of power take-off gear set

Number

Designation

Trans-mission 711.620 with code N05

Trans-mission 711.620/
621 with code N07

BE26.45-N-1002-01E

Axial play of power take-off drive plate

mm

0.10 to 0.20

0.10 to 0.20

Adjust axial play of drive plate
Adjust axial play of drive plate

D26.45-0025-01

D26.45-0024-01

1 Measure dimension "A" from the end face of the countershaft to the retaining ring (32) ( depth gauge).

2 Measure dimension "B" from the end face of the countershaft to the bearing outer race (33).

Adjust axial play of drive plate
Adjust axial play of drive plate

D26.45-0027-01

D26.45-0026-01

3 Measure dimension "C" from the upper edge to the bearing seat of the bearing bore in the transmission cover.

4 Measure dimension "D" from the upper edge to the drive plate (23) in the transmission cover.

Adjust axial play of drive plate

D26.45-0028-01

5 Calculation example for determining the axial play actual dimension:

Dimension "b" = 16.40 mm

- Dimension "A" = 16.30 mm

Dimension "E" = 0.10 mm

Dimension "D" = 15.00 mm

- Dimension "C" = 14.40 mm

Dimension "F" = 0,60 mm

Dimension "F" = 0,60 mm

+Dimension "E" = 0.10 mm

Actual dimension = 0.70 mm

Adjust axial play of drive plate

D26.45-0029-01

Specified play = 0.10 to 0.20 mm

Actual dimension = 0.70 mm

- Permissible axial play = 0.10 mm

Shims = 0,60 mm

Adjusting disks are available in the thicknesses: 0.20; 0.30 mm.

Adjust axial play of drive plate

D26.45-0030-01

6 Insert the adjusting disks (22) when installing the countershaft.