PTO
Number | Designation | PTO 28-2c with output flange code N07 with | PTO 28-2c without output flange code N05 with | PTO 28-2b with output flange code N07 with | |
BA26.45-N-1003-01A | Slave cylinder to power take-off | Nm | 13 | 13 | 13 |
BA26.45-N-1004-01A | PTO hydraulic line bracket to transmission housing | Nm | 55 | 55 | 38 |
PTO
Number | Designation | PTO 28-2c without output flange code N05 with | |
BA26.45-N-1003-01A | Slave cylinder to power take-off | Nm | 13 |
BA26.45-N-1004-01A | PTO hydraulic line bracket to transmission housing | Nm | 38 |
Propeller shaft of PTO
Number | Designation | PTO 28-2b (with output flange Code N07) with transmission 711.612 in models 901, 903, 904.0/4 | PTO 28-2b (with output flange code N07) with transmission 711.620 in models 901.6, 902.6, 903.6, 904.6 | ||
BA41.20-N-1001-01A | Propeller shaft to PTO | 1st stage | Nm | 23 | 23 |
Stage 2 | ° | - | - | ||
Propeller shaft of PTO
Number | Designation | PTO 28-2b (with output flange code N07) with transmission 711.613 in model 667, 668, 670 | |
BA41.20-N-1001-01C | Propeller shaft to PTO | Nm | 23 |
D26.45-0001-01
1 Loosen plug (16) from switch (arrow) on power take-off switch and detach.
D26.45-0002-01
2.1 Detach propeller shaft from power take-off (code N07).
Pay attention to tightening torque.
2.2 Remove hydraulic pump (code N05).
D26.45-0003-01
3 Detach hydraulic line (17) from power take-off slave cylinder.
Installation: Bleed hydraulic line.
4 Detach bracket (18) from transmission.
Pay attention to tightening torque.
5 Install in the reverse order.