Test values for PTO
Número | Denominação | Gearboxes 711.620/622 with CODE N05 and N07 | |||
BE26.45-B-1001-01D | Axial play of the power takeoff output axle | mm | 0,00 | ||
D26.45-0044-01
1 Remove, with light strikes of an appropriate drift, the outside race (1) out of the PTO's flange cover.
2 Remove the compensation washers (2).
D26.45-0045-10
3 Measure the distance (A) from the bearing housing to the sealing surface of the PTO's flange cover (3).
Place a measuring block on the sealing surface and measure with a depth gage in the bearing housing.
Deduct, from the stipulated measurement (B), the height of the measuring body (C): (A = B - C).
D26.45-0046-10
4 Place the PTO's main shaft (5).
5 Place the outside race (1) with light strikes on the outer taper roller bearing.
6 Replace the paper gasket (4) on the sealing surface of the gearbox.
7 Measure the protrusion of the outside race (1) to the gearbox sealing surface with the paper gasket (4) installed, distance (D).
With the help of an assistant, with force press on the bearing during the measuring.
D26.45-0044-01
8 Calculate the distance between the housing of the bearing outside cap on the flange and the same previously assembled cap: (A) - (D).
The 0.1 mm reduction is conditioned by the measuring method:
9 Select the thickness of the compensating washers (2) so that the stipulated clearance is reached (see table).
10 Install compensating washers (2).
11 Install, with light strikes on an appropriated mandrel the outside race (1) until making contact with the bearing housing in the flange cover of the power take-off (3).