1 | Lock-ring |
2 | Ball bearing (main shaft) |
3 | Bolt |
4 | Oil deflector |
5 | Lock-ring |
6 | Rear housing |
7 | Cylindric rollers bearing (counter shaft) |
W26.40-1041-12
| Disassemble | ||
1 | Disassemble the gearbox |
| |
Transmission 712.630/639, 715.06 | |||
2 | Remove locking ring (1) | ||
3 | Remove the radial ball bearing (2) from the main shaft | ||
4 | Remove the oil deflector plate (4) | The oil deflector plate (4) no longer needs to be mounted. | |
5 | Remove the locking ring (5) | ||
6 | Reverse reverse gear (7) | ||
| Assemble | ||
7 | Install the reverse gear (7) | The flat surface of the reverse gear (7) must be installed facing the rear part of the needle roller bearing (6). | |
8 | Install the lock-ring (5) | ||
9 | Install the main shaft (2) radial ball bearing | Install, compulsorily, a new ball bearing. | |
10 | Install the lock-ring (1) | The lock ring (1) must be assembled without play, and if necessary, install another lock ring (1) with the appropriate thickness. | |
.Axial play of input shaft radial bearing | |||
11 | Assemble the gearbox |
| |
Transmission 712.620, 715.05 |