Determine shim for cylindrical actuator of cascade box

AR26.35-B-1000-02TA

Determine shim for cylindrical actuator of cascade box

Transmission

715.358 in model 958.0/1

Transmission

715.372/382/388/527/531 in model 958.4

Transmission

715.517 in model 958.2

Transmission

715.535 in model 958.2

Split group

Number

Designation

Gearbox 715.531/535

Gearbox 715.372/382

BE26.35-B-1002-01A

Splitter group control cylinder adjustment dimension

mm

0,4...0,5

0,4...0,5

Split group

Number

Designation

Gearbox 715.504/517/527/564

Gearbox 715.358

BE26.35-B-1002-01A

Splitter group control cylinder adjustment dimension

mm

0,4...0,5

0,4...0,5

Repair materials

Number

Designation

Order number

BR00.45-Z-1027-06A

Synthetic grease 50 g

A 001 989 32 51 10

1

Pull the power piston (2) until the stop.

2

Install the control cylinder (1) without the sealing rings (3).

3

Lean the shifting cylinder (1) on the piston (2).

4

Measure the distance for the transmission case phase to the cylinder (1), register the value as "measure A".

5

Install the pawl (4).

6

Using the  inner extractor and the  counter bracing, pull the shifting cylinder (1) until it touches the pawl (4) outer radial surface.

7

Measure the distance for the transmission case phase to the cylinder (1), register the value as "measure B".

8

Remove the pawl (4).

9

Remove the shifting cylinder (1) and the  inner extractor with the  shifting cylinder (1) counter bracing .

10

Establish the balance washer to be installed.
. 

 The balance washer to be installed should be thicker than the adjusting measure indicated on the table, "measure C":

 Measure C = measure A  measure B.

11

Install the shifting cylinder (1) with new seal rings.

 Apply synthetic grease to the seal rings.

12

Put the determined balance washer with the spacer washer.

13

Install the pawl (4).