Remove/install rear end cover · ar2630g3001e · Mercedes-Benz WIS

AR26.30-G-3001E

Remove/install rear end cover

17.4.08

TRANSMISSION 715.350 /351 /361 in MODEL 000.001

G26.30-3111-06

Shown on transmission 715.351

1 Oil pump drive shaft

2 Circlip

3 Ball bearing

4 O-ring

5 Rear end cover

6 Screw

7 Pressure relief valve

 	Remove/install
1	Unscrew bolts (6), and remove rear end cover (5)	 The pressure relief valve (7) is spring-loaded.
		 Installation: Replace the O-ring (4). Replace the O-rings of the pressure relief valve (7).
			*BA26.30-N-1004-01KL
2	Detach oil pump drive shaft (1) from rear end cover (5)	 Only carry out if the oil pump drive shaft (1) did not detach from the rear end cover (5) when the rear end cover (5) was removed.
		If the rear end cover (5) is to be replaced, the axial play of the oil pump must be readjusted: 
		Remove oil pump	AR26.55-G-3000E
3	Install in the reverse order

 Cover

Number	Designation		Transmission 715.350	Transmissions 715.351/361


BA26.30-N-1004-01KL	End cover, oil pump at transmission	Nm	60	60