Remove/install gate module

AR26.20-B-1005BKA

12.02.16

Manual transmission 714.183 with Vehicle 634.0

B26.20-0024-06

1 Gearbox command module

2 Electrical command

(3, 4, 5, 6) Compressed air piping

7 Electrical command

8 Screws

9 Screws

10 Support base

11 Screws

12 Rubber ring

	Remove and install
Danger!	Injure risk when disconnecting compressed air piping subject to pressure	Wear protective gloves and goggles	AS42.10-B-0001-01A
1	Remove electrical command connectors (2, 7) on the gearbox command module (1)
2	Remove compressed air piping (3, 4, 5, 6)	Install Examine compressed air piping (3, 4, 5, 6) and replace if necessary.
		With compressed air connection system "VOSS 230"	AR42.10-B-0900A
		With compressed air connection system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).	AR42.10-B-0900B
		 Compressed air piping	*BA26.20-B-1003-03B
3	Remove the screws (8, 9)	 Gear coupling command module	*BA26.20-B-1002-03B
4	Remove gear command (1) from gearbox
5	Remove the screws (11)	 housing cover	*BA26.20-B-1001-03B
6	Remove support base (10) and rubber rings (12)	Install: Replace rubber rings (12) if necessary.
7	Install in reverse order
8	Reprogram gearbox command module		AR54.21-B-0009BA

Shift gate module