Remove/install countershaft brake solenoid valve

AR26.19-G-0013E

17.4.08

TRANSMISSION 715.350 /351 /361 in MODEL 000.001

W26.19-1030-09

1 Gate cylinder housing

2 Sealing ring

3 Gasket

4 Sealing ring

5 Valve seat

6 Sealing ring

Y30 Splitter 2 solenoid valve (MS2)

Y33 Gate 1 solenoid valve (MG1)

Y34 Gate 2 solenoid valve (MG2)

Y125 Countershaft brake solenoid valve

7 Intermediate plate

8 Gasket

A16 Gear control (GS II) control unit

Y29 Splitter 1 solenoid valve (MS1)

 	Remove/install
1	Remove gate module		AR26.20-G-1005E
2	Detach gate cylinder housing (1) from intermediate plate (7) and gear control (GC) control unit (A16)	 Installation: Replace seal (3).
			*BA26.20-N-1001-03KL
3	Remove countershaft brake solenoid valve (Y125)	 Installation: Replace seal (6).
4	Remove splitter 1 solenoid valve (MS1) (Y29) and splitter 2 solenoid valve (MS2) (Y30)	 Installation: Replace sealing rings (6).	AR26.19-G-0007E
5	Remove gate 1 solenoid valve (MG1) (Y33) and gate 2 solenoid valve (MG2) (Y34)	 Installation: Replace sealing rings (6).	AR26.19-G-0009E
6	Remove valve seat (5)	 Only carry out if the countershaft brake solenoid valve (Y125) is to be replaced.
		 Installation: Install new sealing rings (4).
			*140589023300
7	Detach intermediate plate (7) from gear control (GS) control unit (A16)	 Installation: Install a new sealing ring (2) and seal (8).
			*BA26.20-N-1001-03KL
8	Install in the reverse order

 Shift gate module

Number	Designation		Transmission 715.350	Transmissions 715.351/361


BA26.20-N-1001-03KL	Bolt, control unit to intermediate plate	Nm	10	10

Pulling hook

140 589 02 33 00