T26.60-0005-01
1 Gate 1 solenoid valve (MG1)
2 Gate 2 solenoid valve (MG2)
3 Gate shift cylinder
| Remove/install | ||
| Check the compressed air lines and electric cables for damage; replace if necessary | ||
1 | Disconnect electrical connections of solenoid valves (1, 2) | Installation: Observe the assignment of the electric sensors to the solenoid valves. | |
2 | Disconnect pneumatic connection from gate shift cylinder (3) | ||
3 | Detach gate shift cylinder (3) | Installation: Coat sealing surface with sealing compound. | |
| |||
4 | Install in the reverse order |
Transmission pneumatic system
Number | Designation | Trans-mission 714.669 | |
BA26.18-N-1002-01B | Bolt, gate shift cylinder to transmission | Nm | 25 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1092-02A | Adhesive kit, body, 2-component adhesive | A 009 989 36 71 |