Complete manual transmission
Number | Designation | Trans-mission | |
BA26.10-N-1004-01C | Bracket (battery cable) to transmission | Nm | 58 |
Sensors
Number | Designation | Transmission | ||
BA26.19-N-1001-01M | Speed sensor on output end of transmission cover | Nm | 45 | |
A26.10-0007-01
1 Detach the brackets (arrows) of battery lines (1) from transmission housing, .
A26.10-0008-01
2 Detach the holder (arrow) of the battery lines (1) from flywheel housing.
3 Tie up battery lines to one side if necessary.
A26.10-0009-01
4 Detach oil cooler lines (3) from transmission.
Collect any transmission oil which runs out. Seal the oil cooler lines (3) and connection fittings (2) using suitable plugs.
Installation: When replacing the transmission convert the connection fittings (2) from the old to the new transmission. Use new sealing rings.
5 Detach the holder (4) of the clutch booster compressed air line from the transmission housing.
A26.10-0010-01
6 Detach the plug (5) from the speed sensor (B17).
Installation: When replacing the transmission, convert the Speed sensor (B17) from the old to the new transmission, . Install the speed sensor with new sealing cap.
7 Check the installation area of the transmission for lines which obstruct the removal and installation of the transmission; remove cable ties and tie up lines to one side.
8 Install in the reverse order.