Remove/install central clutch operator

AR25.20-P-0180MCC

Remove/install central clutch operator

9.3.10

 

Remove/install

1

Remove transmission

Engine 132.9

AR26.10-P-0020MCC

Engine 660.9

AR26.10-P-0020MCD

2

Remove bolts (3)



*BA25.20-P-1001-01C

3

Unhook spring (4) on release lever (2)

 Do not overstretch spring (4) otherwise the correct seat of the release lever (2) can no longer be guaranteed.

 Installation: Check spring (4), replace if necessary.

Pay attention to correct seat of spring (4).

4

Remove central clutch release bearing (1) with release lever (2) and guide sleeve (5) from transmission (6)

5

Pull guide sleeve (5) out of central clutch release bearing (1)

 Rotate guide sleeve (5) such that the catches on the guide sleeve (5) fit into the cutouts on the central clutch release bearing (1).

6

Carefully push catch hooks (7) together and remove central clutch release bearing (1) from release lever (2)

 Clean and grease bearing points of release lever (2).

 Installation: Check central clutch release bearing (1) for noise, rough running, leakage and wear and replace central clutch release bearing (1) if necessary.

Transmission shaft grease

*BR00.45-Z-1062-06A

7

Install in the reverse order

Number

Designation

Model 451.3/4

BA25.20-P-1001-01C

Bolt, release system to transmission

Nm

10

Number

Designation

Order number

BR00.45-Z-1062-06A

Lubricating grease, Olista Longtime, DB supply specification 6804.60

A 001 989 36 51 10